Section Library
AWS District 16, Chapter 35 (Kansas)
Technical Library Inventory: February 26, 2020
Library Location:
WSU Tech (formerly WATC/Wichita Area Technical College)
Director, Library & Information Services: Britten Kuckelman
[email protected] [email protected]
National Center for Aviation Training (NCAT)
4004 N. Webb Road, Room G116
Wichita, KS 67226
Ph #: 316-677-1417
Color reference for easy search re: code
AWS A2, A3, A10 code series | BROWN |
|---|---|
AWS A4, A5 code series | GRAY |
AWS B code series | GREEN |
AWS C code series | BLUE |
AWS D code series | RED |
AWS F code series | YELLOW |
AWS G code series | ORANGE |
AWS J code series | PURPLE |
AWS Q code series | GREEN |
Unless otherwise noted, all publications are “An American National Standard”
Note: All items are available for reference and IN LIBRARY USE ONLY (cannot be checked out)
| Name | Reference # |
|---|---|
| Bridge Welding Code | AASHTO/AWS D1.5M/D1.5:2008 |
| Bridge Welding Code | AASHTO/AWS D1.5M/D1.5:2008 |
| Bridge Welding Code | AASHTO/AWS D1.5M/D1.5:2010 |
| Bridge Welding Code | AASHTO/AWS D1.5M/D1.5:2015 |
| Ventilation Guide for Weld Fume | ANSI/AWS F3.2M/F3.2:2001 |
| Metric Practice Guide for the Welding Industry | AWS A1.1:2016 |
| Specification for Calibration and Performance Testing of Secondary Current Sensing Coils and Weld Current Monitors used in Single-Phase AC Resistance Welding | AWS A10.1M.2007 |
| Specification for Calibration and Performance Testing of Secondary Current Sensing Coils and Weld Current Monitors used in Single-Phase AC Resistance Welding | AWS A10.1M.2007 |
| Standard Symbols for Welding, Brazing, and Nondestructive Examination | AWS A2.4:2007 |
| Standard Symbols for Welding, Brazing, and Nondestructive Examination | AWS A2.4:2012 |
| Standard Welding Terms and Definitions Including Terms for Adhesive Bonding, Brazing, Soldering, Thermal Cutting, and Thermal Spraying | AWS A3.0M/A3.0:2010 |
| Standard Procedures for Calibrating Magnetic Instruments to Measure the Delta Ferrite Content of Austenitic and Duplex Ferritic-Austenitic Stainless Steel Weld Metal (ISO 8249:2000MOD) | AWS A4.2M:2006 |
| Standard Methods for Classification Testing of Positional Capacity and Root Penetration of Welding Consumables in a Fillet Weld (ISO 15792-3:2011 MOD) | AWS A4.5M/A4.5:2012 |
| Welding and Brazing Consumables–Procurement of Filler Metals and Fluxes | AWS A5.01M/A5.01:2019 (ISO 14344:2010 MOD |
| Welding Consumables-Procurement of Filler Metals and Fluxes | AWS A5.01M/A5.01:2013 (ISO 14344:2010 MOD) |
| Specification for Filler Metal Standard Sizes, Packaging, and Physical Attributes | AWS A5.02/A5.02M:2007 |
| Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding | AWS A5.1/A5.1M:2004 |
| Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding | AWS A5.1/A5.1M:2004 |
| Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding | AWS A5.1/A5.1M:2012 |
| Welding Consumables–Wire Electrodes, Wires and Rods for Welding of Aluminum and Aluminum-Alloys–Classification | AWS A5.10/A5.10M:2017 (ISO 18273:2004 MOD) |
| Welding Consumables–Wire Electrodes, Wires and Rods for Welding of Aluminum and Aluminum-Alloys–Classification | AWS A5.10/A5.10M:2012 (ISO 18273:2004 MOD) |
| Specification for Nickel and Nickel-Alloy Welding Electrodes for Shielded Metal Arc Welding | AWS A5.11/A5.11M:2010 |
| Specification for Nickel and Nickel-Alloy Welding Electrodes for Shielded Metal Arc Welding | AWS A5.11/A5.11M:2018 |
| Specification for Tungsten and Oxide Dispersed Tungsten Electrodes for Arc Welding and Cutting (ISO 6848:2004 MOD) | AWS A5.12M/A5.12:2009 |
| Specification for Surfacing Electrodes for Shielded Metal Arc Welding | AWS A5.13/A5.13M:2010 |
| Specification for Surfacing Electrodes for Shielded Metal Arc Welding | AWS A5.13:2000 |
| Specification for Nickel and Nickel-Alloy Bare Welding Electrodes and Rods | AWS A5.14/A5.14M:2018 |
| Specification for Nickel and Nickel-Alloy Bare Welding Electrodes and Rods | AWS A5.14/A5.14M:2009 |
| Specification for Nickel and Nickel-Alloy Bare Welding Electrodes and Rods | AWS A5.14/A5.14M:2009 |
| Specification for Nickel and Nickel-Alloy Bare Welding Electrodes and Rods | AWS A5.14/A5.14M:2018 |
| Specification for Titanium and Titanium-Alloy Welding Electrodes and Rods | AWS A5.16/A5.16M:2004 |
| Specification for Titanium and Titanium-Alloy Welding Electrodes and Rods | AWS A5.16/A5.16M:2007 |
| Specification for Titanium and Titanium-Alloy Welding Electrodes and Rods | AWS A5.16/A5.16M:2007 |
| Specification for Titanium and Titanium-Alloy Welding Electrodes and Rods | AWS A5.16/A5.16M:2013 (ISO 24034:2010 MOD) |
| Specification for Titanium and Titanium-Alloy Welding Electrodes and Rods | AWS A5.16/A5.16M:2013 (ISO 24034:2010 MOD) |
| Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding | AWS A5.18/A5.18M:2001 |
| Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding | AWS A5.18/A5.18M:2017 |
| Specification for Carbon and Low-Alloy Steel Rods for Oxyfuel Gas Welding | AWS A5.2/A5.2M:2007 |
| Specification for Carbon and Low-Alloy Steel Rods for Oxyfuel Gas Welding | AWS A5.2/A5.2M:2007 |
| Specification for Carbon and Low-Alloy Steel Rods for Oxyfuel Gas Welding | AWS A5.2/A5.2M:2018 |
| Specification for Bare Electrodes and Rods for Surfacing | AWS A5.21/A5.21M:2011 |
| Specification for Bare Electrodes and Rods for Surfacing | AWS A5.21:2001 |
| Specification for Stainless Steel Flux Cored and Metal Cored Welding Electrodes and Rods | AWS A5.22/A5.22M:2010 |
| Specification for Stainless Steel Flux Cored and Metal Cored Welding Electrodes and Rods | AWS A5.22/A5.22M:2012 |
| Specification for Low-Alloy Steel Electrodes and Fluxes for Submerged Arc Welding | AWS A5.23/A5.23M:2007 |
| Specification for Low-Alloy Steel Electrodes and Fluxes for Submerged Arc Welding | AWS A5.23/A5.23M:2007 |
| Specification for Zirconium and Zirconium-Alloy Welding Electrodes and Rods | AWS A5.24/A5.24M:2005 |
| Specification for Zirconium and Zirconium-Alloy Welding Electrodes and Rods | AWS A5.24/A5.24M:2014 |
| Specification for Low-Alloy Steel Electrodes for Flux Cored Arc Welding | AWS A5.29/A5.29M:2010 |
| Specification for Consumable Inserts | AWS A5.30/A5.30M:2007 |
| Specification for Consumable Inserts | AWS A5.30/A5.30M:2007 |
| Specification for Fluxes for Brazing and Braze Welding | AWS A5.31M/A5.31:2012 |
| Welding Consumables-Gases and Gas Mixtures for Fusion Welding and Allied Processes (ISO 14175:2008 MOD) | AWS A5.32M/A5.32:2011 |
| Specification for Nickel-Alloy Electrodes for Flux Cored Arc Welding | AWS A5.34/A5.34M:2007 |
| Specification for Nickel-Alloy Electrodes for Flux Cored Arc Welding | AWS A5.34/A5.34M:2007 |
| Specification for Nickel-Alloy Electrodes for Flux Cored Arc Welding | AWS A5.34/A5.34M:2013 |
| Specification for Nickel-Alloy Flux Cored and Metal Cored Welding Electrodes | AWS A5.34/A5.34M:2018 |
| Specification for Covered Electrodes for Underwater Wet Shielded Metal Arc Welding | AWS A5.35:2015 |
| Specification for Carbon and Low-Alloy Steel Flux Cored Electrodes for Flux Cored Arc Welding and Metal Cored Electrodes for Gas Metal Arc Welding | AWS A5.36/A5.36M:2012 |
| Specification for Carbon and Low-Alloy Steel Flux Cored Electrodes for Flux Cored Arc Welding and Metal Cored Electrodes for Gas Metal Arc Welding | AWS A5.36/A5.36M:2016 |
| Specification for Stainless Steel Electrodes for Shielded Metal Arc Welding | AWS A5.4/A5.4M:2006 |
| Specification for Stainless Steel Electrodes for Shielded Metal Arc Welding | AWS A5.4/A5.4M:2006 |
| Specification for Stainless Steel Electrodes for Shielded Metal Arc Welding | AWS A5.4/A5.4M:2012 |
| Specification for Low-Alloy Steel Electrodes for Shielded Metal Arc Welding | AWS A5.5/A5.5:2006 |
| Specification for Low-Alloy Steel Electrodes for Shielded Metal Arc Welding | AWS A5.5/A5.5M:2006 |
| Specification for Low-Alloy Steel Electrodes for Shielded Metal Arc Welding | AWS A5.5/A5.5M:2014 |
| Specification for Copper and Copper-Alloy Electrodes for Shielded Metal Arc Welding | AWS A5.6/A5.6M:2008 |
| Specification for Copper and Copper-Alloy Electrodes for Shielded Metal Arc Welding | AWS A5.6/A5.6M:2008 |
| Specification for Copper and Copper-Alloy Bare Welding Rods and Electrodes | AWS A5.7/A5.7M:2007 |
| Specification for Copper and Copper-Alloy Bare Welding Rods and Electrodes | AWS A5.7/A5.7M:2007 |
| Specification for Filler Metals for Brazing and Braze Welding | AWS A5.8M/A5.8:2019 |
| Specification for Filler Metals for Brazing and Braze Welding | AWS A5.8/A5.8M:2004 |
| Welding Consumables–Wire Electrodes, Strip Electrodes, Wires, and Rods for Arc Welding of Stainless and Heat Resisting Steels–Classification | AWS A5.9/A5.9M:2017 (ISO 14343:2009 MOD) |
| Specification for Bare Stainless Steel Welding Electrodes and Rods | AWS A5.9/A5.9M:2006 |
| Specification for Bare Stainless Steel Welding Electrodes and Rods | AWS A5.9/A5.9M:2012 |
| Guide for Verification and Validation in Computation Weld Mechanics | AWS A9.5:2013 |
| Guide for the Nondestructive Examination of Welds | AWS B1.10M/B1.10:2009 |
| Guide for the Nondestructive Examination of Welds | AWS B1.10M/B1.10:2016 |
| Guide for the Visual Examination of Welds | AWS B1.11M/B.1.11:2015 |
| Specification for Welding Procedure and Performance Qualification | AWS B2.1/B2.1M:2009 |
| Specification for Welding Procedure and Performance Qualification | AWS B2.1/B2.1M:2014 |
| Base Metal Grouping for Welding Procedure and Performance Qualification | AWS B2.1-BMG:2005 |
| Specification for Brazing Procedure and Performance Qualification | AWS B2.2/B2.2M:2010 |
| Specification for Brazing Procedure and Performance | AWS B2.2/B2.2M:2016 |
| Specification for Soldering Procedure and Performance Qualification | AWS B2.3/B2.3M:2008 |
| Specification for Soldering Procedure and Performance Qualification | AWS B2.3/B2.3M:2012 |
| Specification for Soldering Procedure and Performance Qualification | AWS B2.3/B2.3M:2018 |
| Specifications for Welding Procedure and Performance Qualification for Thermoplastics | AWS B2.4:2006 |
| Specification for Welding Procedure and Performance Qualification for Thermoplastics | AWS B2.4:2006 |
| Specification for Welding Procedure and Performance Qualification for Thermoplastics | AWS B2.4:2012 |
| Standard Methods for Mechanical Testing of Welds | AWS B4.0:2007 |
| Standard Methods for Mechanical Testing of Welds | AWS B4.0:2016 |
| Specification for the Qualification of Welding Inspectors | AWS B5.1:2013 |
| Specification for the Training, Qualification, and Company Certification of Welding Inspector Specialists and Welding Inspector Assistants | AWS B5.2:2018 |
| Specification for the Qualification of Welding Sales Representatives | AWS B5.14:2009 |
| Specification for the Qualification of Radiographic Interpreters | AWS B5.15:2010 |
| Specification for the Qualification of Welding Engineers | AWS B5.16:2006 |
| Specification for the Qualification of Welding Fabricators | AWS B5.17:2014 |
| Specification for the Qualification of Welding Fabricators | AWS B5.17:2008 |
| Specification for the Qualification of Welding Supervisors | AWS B5.9:2006 |
| Recommended Practices for Resistance Welding | AWS C1.1M/C1.1:2012 |
| Specification for Resistance Welding of Carbon and Low-Alloy Steels | AWS C1.4M/C1.4:2017 |
| Specification for Resistance Welding of Carbon and Low-Alloy Steels | AWS C1.4M/C1.4:2009 |
| Specification for Resistance Welding of Carbon and Low-Alloy Steels | AWS C1.4M/C1.4:2009 |
| Specification for the Qualification of Resistance Welding Technicians | AWS C1.5:2009 |
| Specification for the Qualification of Resistance Welding Technicians | AWS C1.5:2009 |
| Specification for the Qualification of Resistance Welding Technicians | AWS C1.5:2015 |
| Guide for Thermal-Spray Operator Qualification Programs | AWS C2.16/C2.16M:2017 |
| Guide for Thermal-Spray Operator Qualification | AWS C2.16/C2.16M:2002 |
| Specification for the Application of Thermal Spray Coatings to Machine Elements for OEM and Repair | AWS C2.19/C2.19M:2013 |
| Specification for Thermal Spraying Zinc Anodes on Steel Reinforced Concrete | AWS C2.20/C2.20M:2002 |
| Specification for Thermal Spraying Zinc Anodes on Steel Reinforced Concrete | AWS C2.20/c2.20M:2016 |
| Specification for Thermal Spray Equipment Acceptance Inspection | AWS C2.21M/C2.21:2003 |
| Specification for Thermal Spray Equipment Performance Verification | AWS C2.21M/C2.21:2015 |
| Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel | AWS C2.23M/C2.23:2003, NACE No. 12, SSPC-CS 23.00 |
| Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel | AWS C2.23M/C2.23:2018, NACE No. 12, SSPC CS-23 |
| Specification for Thermal Spray Feedstock–Wire and Rods | AWS C2.25/C2.25M:2012 (R2018) |
| Specification for Thermal Spray Feedstock–Wire and Rods | AWS C2.25/2.25M:2012 |
| Specification for Thermal Spray Feedstock-Solid and Composite Wire and Ceramic Rods | AWS C2.25/C2.25M:2002 |
| Specification for Torch Soldering | AWS C3.11M/C3.11:2011 |
| Specification for Furnace Soldering | AWS C3.12M/C3.12:2017 |
| Standard Method for Evaluating the Strength of Brazed Joints | AWS C3.2M/C3.2:2001 |
| Standard Method for Evaluating the Strength of Brazed Joints | AWS C3.2M/C3.2:2008 |
| Standard Method for Evaluating the Strength of Brazed Joints | AWS C3.2M/C3.2:2019 |
| Recommended Practices for the Design, Manufacture, and Examination of Critical Brazed Components | AWS C3.3:2002 |
| Recommended Practices for the Design, Manufacture, and Examination of Critical Brazed Components | AWS C3.3:2008 |
| Specification for Torch Brazing | AWS C3.4M/C3.4:2007 |
| Specification for Torch Brazing | AWS C3.4M/C3.4:2007 |
| Specification for Torch Brazing | AWS C3.4M/C3.4:2016 |
| Specification for Induction Brazing | AWS C3.5M/C3.5:2007 |
| Specification for Induction Brazing | AWS C3.5M/C3.5:2007 |
| Specification for Induction Brazing | AWS C3.5M/C3.5:2016 |
| Specification for Furnace Brazing | AWS C3.6M/C3.6:2008 |
| Specification for Furnace Brazing | AWS C3.6M/C3.6:2008 |
| Specification for Furnace Brazing | AWS C3.6M/C3.6:2016 |
| Specification for the Ultrasonic Pulse-Echo Examination of Brazed Joints | AWS C3.8M/C3.8:2011 |
| Specification for Resistance Brazing | AWS C3.9M/C3.9:2009 |
| Recommended Practices for Safe Oxyfuel Gas Cutting Torch Operation | AWS C4.2/C4.2M:2006 |
| Recommended Practices for Safe Oxyfuel Gas Cutting Torch Operation | AWS C4.2/C4.2M:2009 |
| Recommended Practices for Safe Oxyfuel Gas Cutting Torch Operation | AWS C4.2/C4.2M:2009 |
| Recommended Practices for Oxyfuel Gas Cutting Torch Operation | AWS C4.2/C4.2M:2017 |
| Operator’s Manual for Oxyfuel Gas Cutting | AWS C4.2:2002 |
| Recommended Practices for Safe Oxyfuel Gas Heating Torch Operating | AWS C4.3/C4.3M:2007 |
| Recommended Practices for Safe Oxyfuel Gas Heating Torch Operation | AWS C4.3/C4.3M:2007 |
| Recommended Practices for Oxyfuel Gas Heating Torch Operation | AWS C4.3/C4.3M:2018 |
| Recommended Practices for Heat Shaping and Straightening with Oxyfuel Gas Heating Torches | AWS C4.4/C4.4:2007 |
| Recommended Practices for Heat Shaping and Straightening with Oxyfuel Gas Heating Torches | AWS C4.4/C4.4M:2004 |
| Recommended Practices for Heat Shaping and Straightening with Oxyfuel Gas Heating Torches | AWS C4.4/C4.4M:2007 |
| Uniform Designation for System for Oxyfuel Nozzles | AWS C4.5M:2006 |
| Uniform Designation System for Oxyfuel Nozzles | AWS C4.5M:2012 |
| Thermal Cutting-Classification of Thermal Cuts-Geometric Product Specification and Quality Tolerances (ISO 9013:2002IDT) | AWS C4.6M:2006 |
| Recommended Practices for Air Carbon Arc Gouging and Cutting | AWS C5.3:2000 |
| Specification for Friction Welding of Metals | AWS C6.2/C6.2M:2006 |
| Recommended Practices for Electron Beam Welding | AWS C7.1M/C7.1:2004 |
| Recommended Practices for Electron Beam Welding and Allied Processes | AWS C7.1M/C7.1:2013 |
| Recommended Practices for Electron Beam Welding and Allied Processes | AWS C7.1M/C7.1:2013 |
| Recommended Practices for Laser Beam Welding, Cutting, and Allied Processes | AWS C7.2M:2010 |
| Process Specification for Electron Beam Welding | AWS C7.3:2016 |
| Process Specification and Operator Qualification for Laser Beam Welding | AWS C7.4/C7.4M:2017 |
| Process Specification and Operator Qualification for Laser Beam Welding | AWS C7.4/C7.4M:2008 |
| Process Specification and Operator Qualification for Laser Hybrid Welding | AWS C7.6/C7.6M:2017 |
| Structural Welding Code-Steel | AWS D1.1:2015 |
| Structural Welding Code-Steel | AWS D1.1/D1.1M:2008 |
| Structural Welding Code-Steel | AWS D1.1/D1.1M:2010 |
| Structural Welding Code-Aluminum | AWS D1.2/D1.2M:2008 |
| Structural Welding Code-Aluminum | AWS D1.2/D1.2M:2014 |
| Structural Welding Code-Sheet Steel | AWS D1.3/D1.3M:2008 |
| Structural Welding Code-Sheet Steel | AWS D1.3/D1.3M:2008 |
| Structural Welding Code-Sheet Steel | AWS D1.3/D1.3M:2018 |
| Structural Welding Code–Reinforcing Steel | AWS D1.4/D1.4M:2011 |
| Structural Welding Code-Steel Reinforcing Bars | AWS D1.4/D1.4M:2018 |
| Structural Welding Code-Stainless Steel | AWS D1.6/D1.6M:2017 |
| Structural Welding Code-Stainless Steel | AWS D1.6/D1.6M:2007 |
| Structural Welding Code-Stainless Steel | AWS D1.6/D1.6M:2007 |
| Guide for Strengthening and Repairing Existing Structures | AWS D1.7/D1.7M:2010 |
| Structural Welding Code-Seismic Supplement | AWS D1.8/D1.8M:2005 |
| Structural Welding Code-Seismic Supplement | AWS D1.8/D1.8M:2009 |
| Structural Welding Code-Seismic | AWS D1.8/D1.8M:2016 |
| Structural Welding Code-Titanium | AWS D1.9/D1.9M:2007 |
| Structural Welding Code-Titanium | AWS D1.9/D1.9M:2007 |
| Structural Welding Code-Titanium | AWS D1.9/D1.9M:2015 |
| Guide for Root Pass Welding of Pipe Without Backing | AWS D10.11M/D10.11:2007 |
| Recommended Practices for the Brazing of Copper Tubing and Fittings for Medical Gas Systems | AWS D10.13/D10.13M:2001 |
| Guide for Multipass Orbital Machine Pipe Groove Welding | AWS D10.14M/D10.14:2010 |
| Guide for Welding Ferritic/Austenitic Duplex Stainless Steel Piping and Tubing | AWS D10.18M/D10.18:2008 |
| Guide for Welding Ferritic/Austenitic Duplex Stainless Steel Piping and Tubing | AWS D10.18M/D10.18:2018 |
| Guide for the Gas Shielded Arc Welding of Aluminum and Aluminum Alloy Pipe | AWS D10.7M/D10.7:2000 |
| Guide for the Gas Shielded Arc Welding of Aluminum and Aluminum Alloy Pipe | AWS D10.7M/D10.7:2008 |
| Specification for Welding Earthmoving, Construction, Agricultural, and Ground-Based Material Handling Equipment | AWS D14.3/D14-3M:2019 |
| Specification for Welding Earthmoving, Construction, and Agricultural Equipment | AWS D14.3/D14.3M:2010 |
| Specification for Welded Joints in Machinery and Equipment | AWS D14.4/D14.4M:2005 |
| Specification for the Design of Welded Joints in Machinery and Equipment | AWS D14.4/D14.4M:2019 |
| Specification for the Design of Welded Joints in Machinery and Equipment | AWS D14.4/D14.4M:2012 |
| Specification for Welding of Presses and Press Components | AWS D14.5/D14.5M:2009 |
| Specification for Welding of Rotating Elements of Equipment | AWS D14.6/D14.6M:2005 |
| Specification for Welding of Rotating Elements of Equipment | AWS D14.6/D14.6M:2012 |
| Standard Methods for the Avoidance of Cold Cracks (ISO/TR 17844:2004 IDT) | AWS D14.8M:2009 |
| Specification for the Welding of Hydraulic Cylinders | AWS D14.9/D14.9M:2013 |
| Railroad Welding Specification for Cars and Locomotives | AWS D15.1/D15.1M:2019 |
| Railroad Welding Specification for Cars and Locomotives | AWS D15.1/D15.1M:2005 |
| Railroad Welding Specification for Cars and Locomotives | AWS D15.1/D15.1M:2007 |
| Railroad Welding Specification for Cars and Locomotives | AWS D15.1/D15.1M:2012 |
| Recommended Practices for the Welding of Rails and Related Rail Components for Use by Rail Vehicles | AWS D15.2/D15.2M:2013 |
| Specification for Robotic Arc Welding Safety | AWS D16.1M/D16.1:2004 |
| Specification for Robotic Arc Welding Safety | AWS D16.1M/D16.1:2018 |
| Guide for Components of Robotic and Automatic Arc Welding Installations | AWS D16.2M/D16.2:2007 |
| Guide for Components of Robotic and Automatic Arc Welding Installations | AWS D16.2M/D16.2:2007 |
| Risk Assessment Guide for Robotic Arc Welding | AWS D16.3M/D16.3:2017 |
| Risk Assessment Guide for Robotic Arc Welding | AWS D16.3M/D16.3:2009 |
| Risk Assessment Guide for Robotic Arc Welding | AWS D16.3M/D16.3:2009 |
| Specification for the Qualification of Robotic Arc Welding Personnel | AWS D16.4M/D16.4:2015 |
| Specification for Robot Arc Welding Training and Testing Cell | AWS D16.6M/D16.6:2018 |
| Specification for Fusion Welding for Aerospace Applications | AWS D17.1/D17.1M:2017 |
| Specification for Fusion Welding for Aerospace Applications | AWS D17.1/D17.1M:2-17-AMD2 |
| Specification for Resistance Welding for Aerospace Applications | AWS D17.2/D17.2M:2007 |
| Specification for Resistance Welding for Aerospace Applications | AWS D17.2/D17.2M:2007 |
| Specification for Resistance Welding for Aerospace Applications | AWS D17.2/D17.2M:2013 |
| Specification for Resistance Welding for Aerospace Applications | AWS D17.2/D17.2M:2019 |
| Specification for Friction Stir Welding of Aluminum Alloys for Aerospace Applications | AWS D17.3/D17.3M:2010 |
| Specification for Friction Stir Welding of Aluminum Alloys for Aerospace Applications | AWS D17.3/D17.3M:2016 |
| Specification for Welding of Austenitic Stainless Steel Tube and Pipe Systems in Sanitary (Hygienic) Applications | AWS D18.1/D18.1M:2009 |
| Specification for Welding of Tanks, Vessels, and Other Equipment in Sanitary (Hygienic) Applications | AWS D18.3/D18.3M:2015 |
| Specification for Fabrication of Metal Components using Additive Manufacturing | AWS D20.1/D20.1M:2019 |
| Underwater Welding Code | AWS D3.6M:2017 |
| Underwater Welding Code | AWS D3.6M:2010 |
| Guide for Aluminum Hull Welding | AWS D3.7:2004 |
| Specification for the Classification of Weld-Through Paint Primers | AWS D3.9/D3.9M:2019 |
| Specification for Classification of Weld-Through Paint Primers | AWS D3.9:2010 |
| Specification for Automotive Weld Quality-Arc Welding of Aluminum | AWS D8.14M:2008 |
| Specification for Automotive Weld Quality-Arc Welding of Aluminum | AWS D8.14M:2017 |
| Specification for Automotive Weld Quality – Resistance Spot Welding of Steel | AWS D8.1M:2007 |
| Specification for Automotive Weld Quality-Resistance Spot Welding of Steel | AWS D8.1M:2007 |
| Specification for Automotive Weld Quality-Resistance Spot Welding of Steel | AWS D8.1M:2013 |
| Specification for Automotive Weld quality-Resistance Spot Welding of Aluminum | AWS D8.2M:2017 |
| Specification for Automotive Resistance Spot Welding Electrodes | AWS D8.6:2005 |
| Recommended Practices for Automotive Weld Quality-Resistance Spot Welding | AWS D8.7M:2005 |
| Specification for Automotive Weld Quality-Arc Welding of Steel | AWS D8.8M:2014 |
| Specification for Automotive Weld Quality-Arc Welding of Steel | AWS D8.8M:2007 |
| Test Methods for Evaluating the Resistance Spot Welding Behavior of Automotive Sheet Steel Materials | AWS D8.9M:2012 |
| Sheet Metal Welding Code | AWS D9.1/D9.1M:2018 |
| Sheet Metal Welding Code | AWS D9.1M/D9.1:2006 |
| Sheet Metal Welding Code | AWS D9.1M/D9.1:2012 |
| Sheet Metal Welding Code | AWS D9.1M/D9.2006 |
| Method for Sampling Airborne Particulates Generated by Welding and Allied Processes | AWS F1.1M:2006 |
| Methods for Sampling Fumes and Gases Generated by Welding and Allied Processes | AWS F1.1M:2018 |
| Method for Sampling Airborne Particulates Generated by Welding and Allied Processes | AWS F1.1M:2006 |
| Laboratory Method for Measuring Fume Generation Rates and Total Fume Emission of Welding and Allied Processes | AWS F1.2:2006 |
| Laboratory Method for Measuring Fume Generation Rates and Total Fume Emission of Welding and Allied Processes | AWS F1.2:2013 |
| A Sampling Strategy Guide for Evaluating Contaminants in the Welding Environment | AWS F1.3M:2006 |
| A Sampling Strategy Guide for Evaluating Contaminants in the Welding Environment | AWS F1.3M:2006 |
| Methods for Sampling and Analyzing Gases from Welding and Allied Processes | AWS F1.5M:2003 |
| Guide for Estimating Welding Emissions for EPA and Ventilation Permit Reporting | AWS F1.6:2017 |
| Guide for Estimating Welding Emissions for EPA and Ventilation Permit Reporting | AWS F1.6:2003 |
| Specification for Use and Performance of Transparent Welding Curtains and Screens | AWS F2.3M:2019 |
| Specification for Use and Performance of Transparent Welding Curtains and Screens | AWS F2.3M:2001 |
| Specification for Use and Performance of Transparent Welding Curtains and Screens | AWS F2.3M:2011 |
| Ventilation Guide for Weld Fume | AWS F3.2:2018 |
| Safe Practices for the Preparation of Containers and Piping for Welding, Cutting, and Allied Processes | AWS F4.1:2017 |
| Safe Practices for the Preparation of Containers and Piping for Welding and Cutting | AWS F4.1:2007 |
| Safe Practices for the Preparation of Containers and Piping for Welding and Cutting | AWS F4.1:2007 |
| Guide for the Evaluation of Hot Gas, Hot Gas Extrusion, and Heated Tool Butt Thermoplastic Welds | AWS G1.10M:2001 |
| Guide for the Evaluation of Thermoplastic Welds | AWS G1.10M:2016 |
| Guide to Ultrasonic Assembly of Thermoplastics | AWS G1.1M/G1.1:2006 |
| Specification for the Qualification of Plastics Welding Inspectors for Hot Gas, Hot Gas Extrusion, and Heated Tool Butt Thermoplastic Welds | AWS G1.6:2006 |
| Guide for the Joining of Wrought Nickel-Based Alloys | AWS G2.1M/G2.1:2002 |
| Guide for the Joining of Wrought Nickel-Based Alloys | AWS G2.1M/G2.1:2012 |
| Guide for the Joining of Wrought Solid Solution Austenitic Stainless Steels | AWS G2.3M/G2.3:2009 |
| Guide for the Joining of Solid Solution Austenitic Stainless Steels | AWS G2.3M/G2.3:2012 |
| Guide for the Joining of Solid Solution Austenitic Stainless Steels | AWS G2.3M/G2.3:2019 |
| Guide for the Fusion Welding of Titanium and Titanium Alloys | AWS G2.4/G2.4M:2007 |
| Guide for the Fusion Welding of Titanium and Titanium Alloys | AWS G2.4/G2.4M:2014 |
| Guide for the Fusion Welding of Zirconium and Zirconium Alloys | AWS G2.5/G2.5M:2012 |
| Specification for Resistance Welding Controls | AWS J1.1M/J1.1:2013 |
| Guide to Installation and Maintenance of Resistance Welding Machines | AWS J1.2M/J1.2:2016 |
| Standard for AWS Certification of Welding Inspectors | AWS QC1:96 |
| Guide for Components of Robotic and Automatic Arc Welding Installations | AWS/NEMA D16.2/D16.2M:2001 |