AMERICAN WELDING SOCIETY
Cumberland Valley Section
Hagerstown, MD
Index to Section Library
Rev. 2
07/17/2006
Color code: Grey/Brown
A1.1:2001 Metric Practice Guide for the Welding Industry
A2.4-1998 Standard Symbols for Welding, Brazing, and Nondestructive Examination
A3.0:2001 Standard Welding Terms and Definitions
A4.2:1997 Standard Procedures for Calibrating Magnetic Instruments to Measure the Delta Ferrite Content of Austenitic and Duplex Ferritic-Austenitic Stainless Steel Weld Metal
A4.3-93 Standard Methods for Determination of the Diffusible Hydrogen Content of Martensitic, Bainitic, and Ferritic Steel Weld Metal Produced by Arc Welding
A5.01-93 Filler Metal Procurement Guidelines
A-5.1. Carbon Steel Electrodes for Shielded Metal Arc Welding
A-5.2 Carbon and Low Alloy Steel Roads for Oxyfuel Gas Welding
A-5.3 Aluminum and Aluminum Alloy Electrodes for Shielding Metal Arc Welding
A-5.4 Stainless Steel Electrodes for Shielding Metal Arc Welding
A-5.5 Low Alloy Steel Electrodes for Shielded Metal Arc Welding
A-5.6 Covered Copper Alloy Arc Welding Electrodes
A-5.7 Copper and Copper Alloy Bare Welding Rods and Electrodes
A-5.8 Filler Metals for Brazing and Braze Welding
A-5.9 Bare Stainless Steel Welding Electrodes and Rods
A-5.10 Bare Aluminum and Aluminum-Alloy Welding Electrodes and Rods
A-5.11 Nickel and Nickel-Alloy Welding Electrodes for Shielded Metal Arc Welding
A-5.12 Tungsten and Tungsten-Alloy electrodes for Arc Welding and Cutting
A-5.13 Surfacing Electrodes for Shielding Metal Arc Welding
A-5.14 Nickel and Nickel-Alloy Bare Welding Electrodes and Rods
A-5.15 Welding Electrodes and Rods for Cast Iron
A-5.16 Titanium and Titanium-Alloy Welding Rods and Electrodes
A-5.17 Carbon Steel Electrodes and Fluxes for Submerged Arc Welding
A-5.18 Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding
A-5.19-92 Specification for Magnesium Alloy Welding Electrodes and Rods
A-5-20 Carbon Steel Electrodes for Flux Cored Arc Welding
A-5.21 Bare Electrodes and Rods for Surfacing
A-5.22 Stainless Steel Electrodes for Flux Cored Arc Welding and Stainless Steel Flux Corded Rods for Gas Tungsten Arc Welding
A-5.23 Low-Alloy Steel Electrodes and Fluxes for Submerged Arc Welding
A-5.24-2005 Zirconium and Zirconium Welding Electrodes and Rods
A-5.25 Carbon and Low-Alloy Steel Electrodes and Fluxes for Electroslag Welding
A-5.26 Carbon and Low-Alloy Steel Electrodes for Electrogas Welding
A-5.28 Low-Alloy Steel Electrodes and Rods for Gas shielded Arc Welding
A-5.29 2005 Low-Alloy Steel Electrodes for Flux cored Arc Welding
A-5.30 Consumable Inserts
A-5.31 Fluxes for Brazing and Braze Welding
A-5.32 Welding Shielding Gases
A9.1-92 Standard Guide for Describing Arc Welding in Computerized Material Property and Nondestructive Examination Databases
A9.2-92 Standard Guide for Recording Arc Weld Material Property and Nondestructive Examination Data in Computerized Databases
Color code: Green
B1.10:1999 Guide for the Nondestructive Examination of Welds
B1.11:2000 Guide for the Visual Examination of Welds
B2.1:2000 Specification for Welding Procedure and Performance Qualification
B2.2:91 Standard for Brazing Procedure and Performance Qualification
B4.0M:2000 Standard Methods for Mechanical Testing of Welds, Metric-Only
B5.2:2001 Specification for the Qualification of Welding Inspector Specialists and Welding Inspector Assistants
B5.9:2000 Specification for the Qualification of Welding Supervisors
B5.16:2001 Specification for the Qualification of Welding Engineers
B5.17:2004 Specification for the Qualification of Welding Fabricators
Color Code: Blue
C1.1M/C1.1:2000 Recommended Practices for Resistance Welding
C1.3-70 Recommended Practices for Resistance Welding Coated Low Carbon Steels
C1.4M/C1.4:1999 Specification for Resistance Welding of Carbon and Low-Alloy Steels
C2.14-74 Corrosion Tests of Flame-Sprayed Coated Steel
C2.16/C2.16M:2002 Guide for Thermal Spray Operator Qualification
C2.18-93 Guide for the Protection of Steel with Thermal Sprayed Coatings of Aluminum and Zinc and Their Alloys and Composites
C3.2:2001 Standard Method for Evaluating the Strength of Brazed Joints in Shear
C3.3-2002 Recommended Practices for Design, Manufacture, and Inspection of Critical Brazed Components
C3.4:1999 Specification for Torch Brazing
C3.5:1999 Specification for Induction Brazing
C3.6:1999 Specification for Furnace Brazing
C3.7:1999 Specification for Aluminum Brazing
C3.8:2005 Recommended Practices for Ultrasonic Inspection of Brazed Joints
C4.2:2002 Operator's Manual Oxyfuel Gas Cutting
C4.3-2004 Operator's Manual for Gas Heating Torch Operations
C4.5M:2000 Uniform Designation System for Oxyfuel Nozzles
C5.1-73 Recommended Practices of Plasma-Arc Welding
C5.2-:2001 Recommended Practices for Plasma Arc Cutting
C5.3:2000 Recommended Practices for Air Carbon Arc Gouging and Cutting
C5.4-93 Recommended Practices for Stud Welding
C5.5-2003 Recommended Practices for Gas Tungsten Arc Welding
C5.6-89R Recommended Practices for Gas Metal Arc Welding
C5.7:2000 Recommended Practices for Electrogas Welding
C5.10-2003 Recommended Practices for Shielding Gases for Welding and Plasma Arc Cutting
C6.1-89R Recommended Practices for Friction Welding
C7.1:1999 Recommended Practices for Electron Beam Welding
C7.2:1998 Recommended Practices for Laser Beam Welding, Cutting and Drilling
C7.3:1999 Process Specification for Electron Beam Welding
Color Code: Red
D1.1:2006 D1.1 Structural Welding Code-Steel
D1.2-2003 Structural Welding Code-Aluminum
D1.3-98 Structural Welding Code-Sheet Steel
D1.4-98 Structural Welding Code-Reinforcing Steel
D1.5M/D1.5:2002 Bridge Welding Code
D1.6:1999 Structural Welding Code-Stainless Steel
D3.5-93 Guide for Steel Hull Welding
D3.6M:1999 Specification for Underwater Welding
D3.7-90 Guide for Aluminum Hull Welding
D8.5-66 Electrode and Force Recommendations for Two and Three Loose Metal Thicknesses
D8.6-77 Standard for Automotive Resistance Spot Welding Electrodes
D8.7-2005 Recommended Practices for Automotive Weld Quality- Resistance Spot Welding
D8.8-97 Specification for Automotive and Light Truck Weld Quality: Arc Welding
D8.9M-2002 Recommended Practices for Test Methods for Evaluating the Resistance Spot Welding Behavior of Automotive Sheet Steel Materials
D9.1M/D9.1:2000 Sheet Metal Welding Code
D10.4-86 Recommended Practices for Welding Austenitic Chromium- Nickel Stainless Steel Piping and Tubing
D8.14M/D8.14:2000 Specification for Automotive and Light Truck Components Weld Quality - Aluminum Arc Welding
D10.10/D10.10M:1999 Recommended Practices for Local Heating of Welds in Piping and Tubing
D10.11-87 Recommended Practices for Root Pass Welding of Pipe Without Backing
D10.12M/D10.12:2000 Guide for Welding Mild Steel Pipe
D10.13-2001 Recommended Practices for Brazing of Copper Pipe and Tubing for Medical Gas Systems
D10.6D/D10.6M:2000 Recommended Practices for Gas Tungsten Arc Welding of Titanium Piping and Tubing
D10.7M/D10.7:2000 Guide for the Gas Shielded Arc Welding of Aluminum and Aluminum Alloy Pipe
D10.8-96 Recommended Practices for Welding of Chromium- Molybdenum Steel Piping and Tubing
D11.2-89 Guide for Welding Iron Castings
D14.1-97 Specification for Welding Industrial and Mill Cranes and Other Material Handling Equipment
D14.2-93 Specification for Metal Cutting Machine Tool Weldments
D14.3:2005 Specification for Welding Earthmoving and Construction Equipment
D14.4:2005 Specification for Welded Joints in Machinery and Equipment
D14.5-97 Specification for Welding of Presses and Press Components
D14.6-2005 Specification for Welding of Rotating Elements of Equipment
D14.7:2005 Recommended practices for Surfacing and Reconditioning Mill Rolls
D15.1:2001 Railroad Welding Specification-Cars and Locomotives
D15.2-94 Recommended Practices for the Welding of Rails and Related Rail Components for Use by Rail Vehicles
D16.2/16.2M:2001 Guide for Components of Robotic and Automatic Welding Installations
D16.3/D16.3M:2001 Risk Assessment Guide for Robotic Arc Welding
D16.4:1999 Specification for Qualification of Robotic Arc Welding Personnel
D17.1:2001 Specification for Fusion Welding for Aerospace Applications
D18.1:1999 Specification for Welding of Austenitic Stainless Steel Tube and Pipe Systems in Sanitary (Hygienic) Applications
D18.2:1999 Guide to Weld Discoloration Levels on Inside of Austenitic Stainless Steel Tube
D18.3:2005 Welding of Tanks, Vessels and other Equipment in Sanitary (Hygienic) Applications
Color Code: Yellow
F1.1:1999 Methods for Sampling Airborne Particulates Generated by Welding and Allied Processes
F1.2:1999 Laboratory Method for Measuring Fume Generation Rates and Total Fume Emission for Welding and Allied Processes
F1.3:1999 A Sampling Strategy Guide for Evaluating Contaminants in the Welding Environment
F1.4-97 Methods for Analysis of Airborne Particles Generated by Welding and Allied Processes
F1.5M-2003 Methods for Sampling and Analyzing Gases for Welding and Allied Processes
F2.1:78 Recommended Safe Practice for Electron Bean Welding and Cutting
F2.3M:2001 Specification for Use and Performance of Transparent Welding Curtains and Screens
F3.1-89 Guide for Welding Fume Control
F3.2M/F3.2:2001 Ventilation Guide for Weld Fume
F4.1:1999 Recommended Safe Procedures for the Preparation for Welding and Cutting Container and Piping
F6.1:78 Method for Sound Level Measurement of Manual Arc Welding and Cutting Processes
Color Code: Rust
G1.2M:/G1.2:1999 Specification for Standardized Ultrasonic Welding Test Specimen for Thermoplastics
G1.10M:2001 Guide for the Evaluation of Hot Gas, Hot Gas Extrusion, and Heated Tool Butt Thermoplastic Welds
Color code: Yellow
Z49.1:1999 Safety in Welding, Cutting and Allied Processes
List of revisions